May 10, 2019 18:26
5 yrs ago
English term
supply channels to the object
English to Russian
Tech/Engineering
Medical: Instruments
Influence of production on the breaking load of three-unit PEEK bridges
For the examination, 15 congruent bridges were fabricated three times. A standardized bridge model of region 24-26 was the basis. A slight indentation was constructed on the occlusal surface of the pontic so that a steel ball with a diameter of 5 mm was perfectly positioned at this point to determine the breaking load...According to the manufacturer specifications, supply channels to the object were waxed onto the wax bridges.
For the examination, 15 congruent bridges were fabricated three times. A standardized bridge model of region 24-26 was the basis. A slight indentation was constructed on the occlusal surface of the pontic so that a steel ball with a diameter of 5 mm was perfectly positioned at this point to determine the breaking load...According to the manufacturer specifications, supply channels to the object were waxed onto the wax bridges.
Proposed translations
(Russian)
3 | каналы подачи воска к объекту | mk_lab |
Change log
May 19, 2019 16:40: mk_lab changed "Field" from "Medical" to "Tech/Engineering"
Proposed translations
16 hrs
Selected
каналы подачи воска к объекту
каналы/линии подачи воска к объекту, на который устанавливается мост
Для моделирования будущего моста объект (место его установки) сначала заполняется воском. По-видимому, речь идет о каналах/трубках, по которым подается этот воск в расплавленном виде
Этапы изготовления цельнолитого протеза
https://stomatologyya.ua.market/content/5803-Zubnie-mostovid...
по восковой модели мостовидного протеза отливается конструкция из металлического сплава
Для моделирования будущего моста объект (место его установки) сначала заполняется воском. По-видимому, речь идет о каналах/трубках, по которым подается этот воск в расплавленном виде
Этапы изготовления цельнолитого протеза
https://stomatologyya.ua.market/content/5803-Zubnie-mostovid...
по восковой модели мостовидного протеза отливается конструкция из металлического сплава
4 KudoZ points awarded for this answer.
Discussion
This ensured a 3-point contact between the steel ball and the occlusal surface. With this data set, 15 bridges from the BioHPP blank and 30 bridges made of wax were form ground on the milling machine. According to the manufacturer specifications, supply channels to the object were waxed onto the wax bridges.