May 27, 2019 10:41
4 yrs ago
English term
secondary write actions
English to Russian
Tech/Engineering
Automation & Robotics
система аварийного останова
методика выполнения заводских приемочных испытаний комплексной РСУ/САО
ESD System Logic check / Verification
1. Check the initial functional status of logic upon SCS startup.
2. Normalize all inputs with simulation signals by the software simulation tool and reset logic to energize output(s) in the case of De-energize to trip logic. (In case of Energize to trip logic, the outputs are de-energized when normalized)
3. Simulate trip condition for a trip input signal using the software simulation tool.
4. Check output trip status, appropriate alarm messages, etc.
5. Normalize and Repeat test for all trip inputs one after another.
6. Check Bypass functions and abnormal situations (Fault conditions).
7. Check the status on Interlock and process Graphics.
8. Voted logic configuration is as per identified Safety Analysis Function Evaluation (SAFE) charts as per requirements in client SRS/SVP.
9. Check if SR and RS blocks are chosen correctly. The trip condition should always have a higher priority than the reset of that trip.
10. The results of the Cross-reference check should be checked for secondary write actions on variables
ESD System Logic check / Verification
1. Check the initial functional status of logic upon SCS startup.
2. Normalize all inputs with simulation signals by the software simulation tool and reset logic to energize output(s) in the case of De-energize to trip logic. (In case of Energize to trip logic, the outputs are de-energized when normalized)
3. Simulate trip condition for a trip input signal using the software simulation tool.
4. Check output trip status, appropriate alarm messages, etc.
5. Normalize and Repeat test for all trip inputs one after another.
6. Check Bypass functions and abnormal situations (Fault conditions).
7. Check the status on Interlock and process Graphics.
8. Voted logic configuration is as per identified Safety Analysis Function Evaluation (SAFE) charts as per requirements in client SRS/SVP.
9. Check if SR and RS blocks are chosen correctly. The trip condition should always have a higher priority than the reset of that trip.
10. The results of the Cross-reference check should be checked for secondary write actions on variables
Proposed translations
(Russian)
3 | операции записи вторичных (переменных) | Enote |
3 | вторичные операции записи | kd42 |
Proposed translations
18 mins
Selected
операции записи вторичных (переменных)
Имхо, надо читать write actions on secondary variables
secondary write мне представляется нонсенсом, операция записи только одна
secondary write мне представляется нонсенсом, операция записи только одна
4 KudoZ points awarded for this answer.
3 hrs
вторичные операции записи
наверное в этой ситуации важно не только, чтобы какие-то действия прошли в системе, но и чтобы по результатам прошла запись значений в переменные, например, для диагностики или удаленного администрирования
Something went wrong...