Glossary entry (derived from question below)
English term or phrase:
geometric indication
Russian translation:
геометрическая индикация
Added to glossary by
Andrew Tishin
Jun 26, 2020 19:00
3 yrs ago
13 viewers *
English term
geometric indication
English to Russian
Tech/Engineering
Metallurgy / Casting
ультразвуковой контроль
Under angle beam examination, indications that are determined to originate from surface conditions (such as weld root geometry) or variations in metallurgical structure in austenitic materials (such as the automatic-to-manual weld clad interface) may be classified as geometric indications. The identity, maximum amplitude, location, and extent of reflector causing a geometric indication shall be recorded.
Proposed translations
(Russian)
3 | геометрическая индикация | Enote |
3 | геометрические дефекты | mk_lab |
Proposed translations
10 hrs
Selected
геометрическая индикация
indication в дефектоскопии (НРК) - это просто индикация (показание), это еще не дефект. Вот определение основных терминов NDT из https://www.facebook.com/nevcc/posts/indication-discontinuit...
Indication: A signal or response from the method or apparatus. Could be the result of something in the specimen under investigation, some external agents, faulty equipment, or intrinsic to the equipment itself (noise)
Discontinuity: A detectable change in the material under study that generates a signal or response. This could be due to some undesirable quality, or to a normal state or behavior of the specimen ( i.e. graininess in a casting)
Flaw: A discontinuity that can be characterized as having undesirable qualities but that is within the boundaries of what the specifications state for rejection
Defect: A discontinuity that is unacceptable to the quality level established (written) by the specification (or tacit) by some known service condition.
Important to notice is that quality is not always related to serviceability. A customer can order a part with a specified level of quality that will far exceed the rigors of service, in this case, quality below the required level cannot be accepted under the argument that the part will still perform well under service conditions.
Или еще одна цитата с учебного сайта https://www.nde-ed.org/GeneralResources/MethodSummary/Method...
The indication is much easier to see than the actual defect.
Соответственно и в нашей терминологической библии Гостехнадзора по НРК https://files.stroyinf.ru/Data1/43/43147/
дефект определяется так :
2.37. Дефект (Defect) - каждое отдельное несоответствие продукции требованиям, установленным нормативной документацией [4].
Понятно, что индикация дефектом еще не является. там же есть даже термин "индикация дефекта":
2.48. Индикация дефекта (Defect indication) - изображение или сигнал от дефекта в форме, типичной для используемого вида (метода) НК [4]*.
Indication: A signal or response from the method or apparatus. Could be the result of something in the specimen under investigation, some external agents, faulty equipment, or intrinsic to the equipment itself (noise)
Discontinuity: A detectable change in the material under study that generates a signal or response. This could be due to some undesirable quality, or to a normal state or behavior of the specimen ( i.e. graininess in a casting)
Flaw: A discontinuity that can be characterized as having undesirable qualities but that is within the boundaries of what the specifications state for rejection
Defect: A discontinuity that is unacceptable to the quality level established (written) by the specification (or tacit) by some known service condition.
Important to notice is that quality is not always related to serviceability. A customer can order a part with a specified level of quality that will far exceed the rigors of service, in this case, quality below the required level cannot be accepted under the argument that the part will still perform well under service conditions.
Или еще одна цитата с учебного сайта https://www.nde-ed.org/GeneralResources/MethodSummary/Method...
The indication is much easier to see than the actual defect.
Соответственно и в нашей терминологической библии Гостехнадзора по НРК https://files.stroyinf.ru/Data1/43/43147/
дефект определяется так :
2.37. Дефект (Defect) - каждое отдельное несоответствие продукции требованиям, установленным нормативной документацией [4].
Понятно, что индикация дефектом еще не является. там же есть даже термин "индикация дефекта":
2.48. Индикация дефекта (Defect indication) - изображение или сигнал от дефекта в форме, типичной для используемого вида (метода) НК [4]*.
4 KudoZ points awarded for this answer.
Comment: "Большое спасибо "
45 mins
геометрические дефекты
признаки геометрических дефектов
Ультразвуковой дефектоскоп CD
http://earchive.tpu.ru/bitstream/11683/54980/1/TPU735143.pdf
Устройство, позволяющее обнаруживать следующие виды дефектов:
–геометрические дефекты, примыкающие к сварным швам или расположенные на них;
–геометрические дефекты в сочетании с потерей металла (точечные,либо сплошные);
–механические повреждения такие как: царапины, риски, задиры и др.;
–трещины расположенные на сварных швах и теле трубы (поперечноориентированные);
–расслоения с выходом на поверхность;–дефекты или смещения поперечного шва;
–дефекты поверхности
--------------------------------------------------
Note added at 22 hrs (2020-06-27 17:34:58 GMT)
--------------------------------------------------
Термин "indication" в дефектоскопии (любой, ультразвуковой, рентгеновской, капиллярной и т.д.) - это признак дефекта. Естественно, никакой метод не гарантирует 100% точности. Поэтому, в протоколах дефектоскопии часто пишут просто "дефект", подразумевая вышесказанное. "Индикация (дефекта)" - это прямая транслитерация (которая весьма неудачно звучит по-русски), хотя по смыслу означает то же самое. А вот "признак дефекта" - это стандартный общеупотребимый термин.
УЛЬТРАЗВУКОВАЯ ДЕФЕКТОСКОПИЯ
irbis.samgups.ru › cgi-bin › cgiirbis_64
Дополнительный признак дефекта при ультразвуковом контроле рельсов
Ультразвуковой дефектоскоп CD
http://earchive.tpu.ru/bitstream/11683/54980/1/TPU735143.pdf
Устройство, позволяющее обнаруживать следующие виды дефектов:
–геометрические дефекты, примыкающие к сварным швам или расположенные на них;
–геометрические дефекты в сочетании с потерей металла (точечные,либо сплошные);
–механические повреждения такие как: царапины, риски, задиры и др.;
–трещины расположенные на сварных швах и теле трубы (поперечноориентированные);
–расслоения с выходом на поверхность;–дефекты или смещения поперечного шва;
–дефекты поверхности
--------------------------------------------------
Note added at 22 hrs (2020-06-27 17:34:58 GMT)
--------------------------------------------------
Термин "indication" в дефектоскопии (любой, ультразвуковой, рентгеновской, капиллярной и т.д.) - это признак дефекта. Естественно, никакой метод не гарантирует 100% точности. Поэтому, в протоколах дефектоскопии часто пишут просто "дефект", подразумевая вышесказанное. "Индикация (дефекта)" - это прямая транслитерация (которая весьма неудачно звучит по-русски), хотя по смыслу означает то же самое. А вот "признак дефекта" - это стандартный общеупотребимый термин.
УЛЬТРАЗВУКОВАЯ ДЕФЕКТОСКОПИЯ
irbis.samgups.ru › cgi-bin › cgiirbis_64
Дополнительный признак дефекта при ультразвуковом контроле рельсов
Something went wrong...