Oct 18, 2015 21:32
8 yrs ago
1 viewer *
English term
T.I.R.
English to Turkish
Tech/Engineering
Mechanics / Mech Engineering
Directives
(For pumps using jackscrews for motor go to step f).
Mount the magnetic base on the drive half coupling (a band clamp may be necessary to hold base due to limited space).
Position the tip of the indicator on the pump shaft just above the seal.
Slowly rotate the driver shaft.
Note and record the T.I.R. reading.
If this reading is more than 0.05 mm (0.002 in) unbolt the drive and reposition the driver in the direction required to reduce the T.I.R. to within the allowable limits
If a register fit is used for alignment, driver will be able to be moved only a few thousandths of an inch.
If enough movement is not obtainable then the male register can be filed to obtain acceptable T.I.R. readings.
On pumps using jackscrews for motor alignment, mount the dial indicator base on the O.D. of the motor half coupling.
Set the indicator on the shaft, position the dial to zero being careful that the indicator is in direct line with one of the jackscrews.
Mount the magnetic base on the drive half coupling (a band clamp may be necessary to hold base due to limited space).
Position the tip of the indicator on the pump shaft just above the seal.
Slowly rotate the driver shaft.
Note and record the T.I.R. reading.
If this reading is more than 0.05 mm (0.002 in) unbolt the drive and reposition the driver in the direction required to reduce the T.I.R. to within the allowable limits
If a register fit is used for alignment, driver will be able to be moved only a few thousandths of an inch.
If enough movement is not obtainable then the male register can be filed to obtain acceptable T.I.R. readings.
On pumps using jackscrews for motor alignment, mount the dial indicator base on the O.D. of the motor half coupling.
Set the indicator on the shaft, position the dial to zero being careful that the indicator is in direct line with one of the jackscrews.
Proposed translations
(Turkish)
4 +1 | Toplam Gösterge Okuması | H&G Ozcan |
5 -1 | Toplam Gösterge Değeri | Salih YILDIRIM |
Proposed translations
+1
6 mins
Selected
Toplam Gösterge Okuması
veya Toplam Gösterge Değeri
TIR: Total Indicator Reading
TIR: Total Indicator Reading
4 KudoZ points awarded for this answer.
-1
1 day 10 hrs
Toplam Gösterge Değeri
Teknik jargon gereğince.
Peer comment(s):
disagree |
Kim Metzger
: Gulser suggested this alternative a long time ago.
4 hrs
|
WOW!
|
Something went wrong...